Ultrasonic gun beauty instrument, radio frequency gold needle, water light instrument, gold micro needle micro crystal head
Gold microneedle nano water light needle, water light instrument, gold microneedle microcrystal head
Integrated circuit board,also known as package substrate or IC carrier board, is an integral part of the integrated circuit (IC) packaging process. It is a key component used to carry and connect high quality integrated circuits.
Motherboard Test Card Applicable To Motherboard Cpu Combo, The Motherboard Tester Is Designed To Quickly Test The Signal And Voltage In The Motherboard. It Can Be Used To Test The Open Circuit Or Short Circuit Of Bga And Cpu. Compatible With All 1151 Motherboards Please Know 1 Dual Processor Motherboard, When Using The 1151 Test Card, If The Battery Is Resting On The Drain Pin And The Indicator Light Is Off, The Positive And Negative Poles May Be Reversed. Please Replace The Positive And Negative Poles Of The Battery.
Module Board Test & Measuring Module PC Computer Motherboard Debug Postcard Analyzer PCI and ISA 4 digit PCI analyzer:standard PCI and ISA interface,easy access to desktop PC. Standard PCI and ISA interfaces for easy access to desktop PCS. 4 digit display,the first 2 digits indicate the current error code,and the last 2 digits indicate the previous error code. PC Diagnostic 4-Digit Card fully compatible with any kind motherboards which has the PCI and ISA bus slot The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes.
Hongxinda is china Sensor Medical Ultrasound Probe FPC control FPC board manufacturer located in Shenzhen.We support our customers at low price Medical Ultrasound Probe FPC. The FPC of the ultrasonic probe consists of the FPC substrate. On the front side of the FPC substrate, there's a first electrode. This first electrode is partly covered by the first covering film stuck on the front side of the durable Medical Ultrasound Probe FPC substrate. The width of the first electrode is a + x. The width of the covered part is x, and the width of the exposed part is a. Here, a is the designed width of the first electrode. The edge of the first covering film above the first electrode has gone through precise trimming processing, with an accuracy within ± 0.05 mm.